Water based high solids hybrid elastomeric waterproofing coating with high tech acrylic and polyurethane resins. _x000D_Fast curing and water tight againstponding water. _x000D__x000D_Ιt develops a water vapour diffusive coating, which keeps its elasticity from -20°C up to +80°C and is non-sticky, walkable and resistant to pedestrian traffic. _x000D__x000D_Excellent crack bridging ability up to 1,5mm._x000D__x000D_Its innovative synthesis permits high build coating even in one coat (1,5kg/m2), very good dirty pick up resistance and superior thermoreflective_x000D_properties. _x000D__x000D_It is certified as cool-thermoreflective coating._x000D__x000D_Reliable and cost-effective water proofing solution. _x000D__x000D_Easy to apply._x000D__x000D_ISOLOR HYBRID AQUA plus carries the CE mark as it is certified by EN-1504-2 as a concrete protection product against penetration, moisture control and increased resistance to limiting the moisture content._x000D__x000D_It is also certified as cold - reflective material (CRES, DEMOKRITOS) and offers excellent heat - refraction (reducing the cooling cost in the summer months)._x000D__x000D_It is a solution of excellent cost-effectiveness in sealing maintenance with or without the use of glass or polyester reinforcement strips. _x000D__x000D_Easy application and maintenance (by qualified or unskilled personnel), user friendly and environment friendly_x000D__x000D_Specific Gravity 1,50-1,54 kg/lt_x000D__x000D_Covering Power and Consumption 1, 25-2 m2 /kg & 0,5-0,8 m2 /kg (roller application) per coat and 0,7-1 m2 /kg & 1- 1,5kg/m2 (thick brush application) depending on_x000D_surface roughness_x000D__x000D_Dilution Up to 5% on volume with water. For application on old bituminous roofing, the first coat should be diluted up to 10%._x000D__x000D_Drying 1-3 hours touch free. Recoat able 8-12 hours._x000D__x000D_Recoatability 6-12 hours after first layer’s application These times prolong under_x000D_cold and wet weather conditions. Walkable after 3-4 hours._x000D__x000D_Water & Alkali resistance Very good water and alkali resistance._x000D__x000D_Elasticity & Elongation at break 350% elongation, film thickness up to 1mm and temperature 23°C_x000D_&. 100% elongation, film thickness up to 1mm and temperature 10°C & Keeps elasticity on temperatures between –20°C and 80°C._x000D__x000D_VOC Class “Exterior wall coatings of mineral substrate”. Type WB. VOC limit=40 gr/lt. Max VOC of product ready for use = 39 gr/lt. VOC: organic_x000D_volatile compounds wit boiling point < 250°C._x000D__x000D_Application tools Brush, Roller, Airless Spray_x000D__x000D_Shades White, Red-brown._x000D__x000D_Reflection in visible spectrum R= 89,5% ±2% (400-750 nm, ASTM E903-96)_x000D__x000D_Reflection in Infra-Rede (IR) area R=89,5% ± 2% (780‐2500 nm, ASTM E903‐96)_x000D__x000D_Emission Coefficient 0,88 (ε, ASTM E408‐71)_x000D__x000D_Adhesion on concrete >4MPa (EN 24624)_x000D__x000D_Adhesion on concrete on which Isolor Hybrid Primer has been applied >6MPa (EN 24624)_x000D__x000D_Tensile Strengh ( 23°C /-20°C) N/mm² = 1.4 / 7.5_x000D__x000D_SURFACE PREPARATION_x000D_New surfaces: apply Isolor Hybrid Primer, which is ready for use_x000D_without delusion. Old surfaces: Clean the surface of dust, oil,_x000D_cropped paints, rust and dampness. If needed use repair products_x000D_like Smaltofill elastic putty and/or polyester reinforcement material and/or PU shielding products. Then apply Isolor Hybrid Primer._x000D__x000D_APPLICATION_x000D_Stir well. Apply uniformly ISOLOR Hybrid Aqua Plus. Higher consumption of the product per m2 affects the lifetime expectancy of_x000D_the coating. The use of polyester reinforcement_x000D_material needs for the application three coats of ISOLOR Hybrid_x000D_Aqua Plus+. Put the reinforcement material on the wet first coat._x000D_After the drying, apply additional two coats._x000D__x000D_CLEANING EQUIPMENT_x000D_While working keep your equipment wet, either in the pot, or in_x000D_the paint lauder. Strain well your tools from paint back to the pot_x000D_and clean immediately with warm water and soap._x000D__x000D_APPLICATION CONDITIONS_x000D_Temperature 8-350C and relative humidity lower than 80%. Do not apply in case of imminent rain._x000D__x000D_STORAGE_x000D_Close well after application. Store in a cool place. Protect from freezing and sun exposure.